Home »» sun managers E [Part E] »» hme/qfe config trouble

hme/qfe config trouble

2007-12-25 0:29:00

Hi All,

I have a Sun E450 with hme and qfe pci card installed on Solaris 2.7 core

I'd like to set all interfaces to 100M, full duplex, and I have the
following in my /etc/system

* hme0 duplex and speed
set hme:hme_adv_autoneg_cap = 0
set hme:hme_adv_100fdx_cap = 1
set hme:hme_adv_100hdx_cap = 0
set hme:hme_adv_10fdx_cap = 0
set hme:hme_adv_10hdx_cap = 0
*
* qfe duplex and speed
set qfe:qfe_adv_autoneg_cap = 0
set qfe:qfe_adv_100fdx_cap = 1
set qfe:qfe_adv_100hdx_cap = 0
set qfe:qfe_adv_10fdx_cap = 0
set qfe:qfe_adv_10hdx_cap = 0

However after reboot, I get all above set to 1

# ndd -get /dev/hme adv_autoneg_cap
1
# ndd -get /dev/hme adv_100fdx_cap
1
# ndd -get /dev/hme adv_100hdx_cap
1

Can anyone shed any light on the above, and how I can diagnose/fix this

Thanks to all

Mark

Actived: 0 answers; - size: 859 bytes; - view related info - Similar thread

Comments

Got something to say?

You must be logged in to post a comment.