PARTIAL SUMMARY: Chat script for null-modem PPP?
2007-12-25 0:46:00
connection yet. Thanks to Lars Hecking and Darren Dunham for their
responses. Lars suggested the following:
> Only ever used ppp for dialing in over a phone line, but you probably get
> by with
> TIMEOUT (some number)
> CONNECT ''
> 'ogin:' (user id)
> 'word:' (passwd)
> 'prompt' ppp
>
> where prompt is replaced with the actual prompt you get. Above is what is
> left over after taking out abort and modem commands from my laptop dialin
> chat script.
I have done this, and it seems to work as far as logging in goes. However,
I get gobbledegook (stuff that looks like line noise) when the connection is
made, and it then times out. (I connect by running pppd at the prompt.)
Also, when I use tip to connect from the "client" machine, I can log in as a
normal user and it acts like tip should. When I log in as ppp_user, though,
I get the same gobbledegook as when I run pppd, and then get dropped back to
a login: prompt.
I used admintool to configure the serial ports. I'm using a 19200 baud
connection with software flow control, with "Service enable" turned on on
the server and off on the client. I didn't change much else.
Any ideas what could be wrong?
Thanks,
Charles
> -----Original Message-----
> From: Homan, Charles (NE)
> Sent: Thursday, March 06, 2003 5:01 PM
> To: 'codeprof at codeprof.com'
> Subject: Chat script for null-modem PPP?
>
>
> All:
>
> I am currently struggling with getting two machines (Sunblade
> 100s running
> Solaris 8) to talk to each other via pppd over a null-modem serial
> connection. I am unclear what my chat script should look
> like. Do I just
> want them to look for "ogin:" and "word:" and issue the
> proper responses, or
> is there more to it? (Actually, if there isn't more to it,
> I'm not sure
> what I'm doing wrong.) Any help would be most appreciated!
>
> Thanks,
> Charles
> _______________________________________________
> codeprof mailing list
> codeprof at codeprof.com
> http://www.codeprof.com/execute/ask/?codeinfoid=21173
Comments
Got something to say?
You must be logged in to post a comment.
