Problem in L9 Autoloader connecting to Sun Enterprise E420R
2007-12-25 2:17:00
We have one E420R server with two StorEdge A1000 RAID. And we want to
connect a StorEdge L9 tape loader to the host. But SCSI connector of the
cable provided by L9 like this, one side is 68pin wide, another is 68pin
narrow. The wide connector is connected to L9, and narrow connector is
connected to host.
And E-420R itself have a 68pin wide SCSI port(femal). And when we use a
cable with both 68pin wide connectors to connect L9 to E420, we cannot
see the L9 when probe-scsi-all. Does the two type of cable or connectors
compatible? Or we must install another SCSI adapter with 68pin narrow
port on the host and use L9 own cable to connect?
Thanks very much
Noah Yan
yanyh at cs.uh.edu
http://www.cs.uh.edu/~yanyh
HPCtools Group
Department of Computer Science
University of Houston
Comments
Got something to say?
You must be logged in to post a comment.
