cdrom problem
2007-12-25 9:27:00
I took out the second SCSI card in the box, did a boot -r then boot cdrom and now I am loading solaris 7.
I guess I should have mentioned the 2 scsi buses huh?
Bill
On Thu, 18 Feb 1999, Elvis wrote:
> I just got a sparc 5 w/oput a cdrom. When I put in a SCSI CD rom (8x read, 4x writer) or a 24x scsi CD (both Mathshita) I get, when I doo a boot -r :
>
> WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000 (esp0):
> data transfer overrun: current esp state:
> esp: State=DATA Last State=DATA_DONE
> esp: Latched stat=0x91<IPND,XZERO,IO> intr=0x10<BUS> fifo 0x88
> esp: last msg out: IDENTIFY; last msg in: COMMAND COMPLETE
> esp: DMA csr=0xa4240010<INTEN>
> esp: addr=fc003278 dmacnt=0 last=fc003078 last_cnt=200
> esp: Cmd dump for Target 1 Lun 0:
> esp: cdblen=6, cdb=[ 0x8 0x0 0x0 0x0 0x1 0x0 ]
> esp: pkt_state=0xf<XFER,CMD,SEL,ARB> pkt_flags=0x802 pkt_statistics=0x2
> esp: cmd_flags=0x1422 cmd_timeout=60
> WARNING: /iommu@0,10000000/sbus@0,10001000/espdma@5,8400000/esp@5,8800000 (esp0):
> Target 1.0 reducing sync. transfer rate
>
> Any ideas on what could be wrong?
>
> Thanks.
>
> Bill
>
>
Comments
Got something to say?
You must be logged in to post a comment.
