CDROMS again

2007-12-25 8:08:00

I was interested in finding out why CDROM cutters had not 'appeared'

yet, here are the replies...

Hi,

        I've been looking for just this too. Not much further since

last time I think we spoke. You were trying the Philips unit as far as

I remember. I believe the Young Minds software can drive it (costs

quite a bit though) and I've heard of a few people in the UK apparently

working on their own driver, but I believe still a few months away.

        Look forward to any news too.

Cheers

        Stuart

From: cyerkes@jpmorgan.com (Chuck Yerkes)

Message-Id: <9303081118.AA06437@gd-dev1.ny.jpmorgan.com>

To: hydres!paul@uknet.ac.uk

Subject: Re: CDROM's again

Status: RO

Read BYTE magazine this month.

chuck yerkes

cyerkes@uk.jpmorgan.com

Try taking a look at Datamation, Feb 15, 1993, p57. There is

an article on cutting CDs and the current state of standards.

Phillips, Sony, and JVC all have cutters. Which have SUN drivers

is a different question... Also, ease of use of the cutters varies -

eg can you test a CD image before you cut a $40 CD? Dataware Technologies

of Cambridge MA is working on improved software for a SUN version.

If you get anything else, please let me know.

John Marsh

jmarsh@mitre.org

Subject: Re: CDROM's again

Status: R

I have just ordered such a system for our lab from Young Minds Inc. of Redlands,

CA. This is the only one that I have found that that will provide full ISO 9660,

RockRidge or Unix format (on demand) compatibility on a Sun SPARCStation using

a double speed writer (Phillips CDD521 or Sony -- Phillips is the standard).

The system consists of both hardware and software (the software to do premastering

but not writing is available separately) consisting of a controller, writer and

premastering software "Makedisk". The controller contains its own 1GB disk and

SCSI interface for the writer, sits on the Sun's SCSI bus and looks like a raw

tape drive to the Sun. "Makedisk" works on the Sun and formats/writes the CD

image to the YMi controller's disk. It can provide either ISO-9660, RockRidge

or Unix-file-system compatible images; it also provides a "PFS" (Portable

File System) file which can be written to the CD-WO and will allow another

(Unix) system which does not support RockRidge to read a RockRidge-format disk.

More than you want to know!

The full system is expensive -- partly because of the cost of the Phillips or

Sony writer (about $7K US for Phillips, about $9K us for Sony), the (prop-

rietary) controller and 1GB disk and partly because of the the fairly sophis-

ticated software. The cost list is about $18,000 ($15,500 US to Universities),

but I understand there is a "stripped-down" version (maybe using a single-speed

writer -- not Phillips) in the works at a lower cost.

My contact is Darrin McBreen:

        email: yngmnds!mcbreen@ucrmath.ucr.edu

        phone: (909) 335_1350

        FAX: (909) 798-0488

  *-------------------------------*--------------------------------------*

  | | |

  | Gordon Lentz | |

  | Laboratory for Astrophysics | |

  | and Space Research | Internet: lentz@ody1.uchicago.edu |

  | Enrico Fermi Institute | SPAN: LASR::LENTZ |

  | University of Chicago | Phone: (312)702-7836 |

  | 933 East 56th Street | Fax: (312)702-6645 |

  | Chicago IL 60637 | |

  | | |

  *-------------------------------*--------------------------------------*

Hi,

We have such a Philips device, and it is connected to a PC indeed.

The reason is, that while writing, it needs 300 kbyte/sec *sustained*

troughput. The laser writes further - even if your SPARC has to wait

some ms because it has to sync or whatever.

I know it's ugly, but think of a PC as a large (600Mbyte) buffer with

DMA that just happens to have a CPU in it. The 'sun-based' solutions

I have seen always use a 'buffer box', and as far as I have seen these

are always more expensive as PC's. I would not be surprized if there

was a PC in them.

With the current street prices of PC's, is there anything more to loose

than one's pride?

Geert Jan

Paul,

    We have the Philips CDrom One-off machine hooked up to one

of our IPC's. It works pretty well, but since I'm with the U.S.

government, I can't endorse it in any way. I can give you

an e-mail address of the company which sold us ours.

Hope this helps,

Vender:

     Young Minds Inc.

     Mathew Hornbeck

     e-mail: yngmnds!hornbeck@ucrmath.ucr.edu

     

The cheapest CD-ROM writer I have seen is from Pinnacle Micro and is

being advertised at US$3995 including software. Blank media is around

US$30. Let me know if you can't find an address for Pinnacle Micro.

This is sigificantly cheaper than the Philips drive.

If you do want to buy the Philips drive with good authoring software,

check out a company called Dataware Technologies. You can reach them

at 617 621 0820 in Cambridge MA. I would think that they would have a

UK presence as well. I know several people at this company and they

seem to be very good.

                --Jim Dempsey--

                jjd@bbn.com

Paul Humphreys ( Postmaster ) paul@hydres.uucp

HR Wallingford paul%hydres.uucp@uknet.ac.uk

Howbery Park

Wallingford Tel: 0491-35381 X2292

Oxon Fax: 0491-32233

OX10-8BA

Comments

Got something to say?

You must be logged in to post a comment.