Installing a Netra X1 from the net
2007-12-24 22:17:00
I am trying to install a netra from an install server. I followed the
instructions in the Netra X1 user's guide to setup an install server on
a Sun Blade 100 in the same subnet and then tried to install.
I added the client as follows where 192.168.1.10 is the ip-address of
the machine I want to assign to the netra and 00:03:ba:0f:d3:0f is its
ether address. CentauriA is the hostname I want to give the netra.
InstallServer# ./add_install_client -i 192.168.1.10 -e 00:03:ba:0f:d3:0f
CentauriA sun4u
couldn't set locale correctly
couldn't set locale correctly
couldn't set locale correctly
couldn't set locale correctly
couldn't set locale correctly
couldn't set locale correctly
cleaning up preexisting install client "CentauriA"
couldn't set locale correctly
couldn't set locale correctly
removing CentauriA from bootparams
removing /etc/bootparams, since it is empty
removing /tftpboot/inetboot.SUN4U.Solaris_8-1
removing /tftpboot
disabling tftp in /etc/inetd.conf
making /tftpboot
enabling tftp in /etc/inetd.conf
couldn't set locale correctly
couldn't set locale correctly
updating /etc/bootparams
copying inetboot to /tftpboot
InstallServer#
Anybody knows what this "couldn't set locale correctly" means? I asume
it has nothing to do with the net install but who knows... When I try to
netboot the netra I get the following:
ok boot net
Res
LOM event: +0h36m21s host reset
etting ...
Sun Netra X1 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 128 MB memory installed, Serial #51368719.
Ethernet address 0:3:ba:f:d3:f, Host ID: 830fd30f.
Executing last command: boot net
Boot device: /pci at 1f,0/ethernet at c File and args:
Timeout waiting for ARP/RARP packet
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
NOTICE: dmfe0: PHY 1 link down
NOTICE: dmfe1: PHY 1 link down
NOTICE: dmfe0: PHY 1 link up 10 Mbps Half-Duplex
whoami: no domain name
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Skipping interface dmfe1
Configured interface dmfe0
Usage:
mount [-v | -p]
mount [-F FSType] [-V] [current_options] [-o specific_options]
{special | mount_point}
mount [-F FSType] [-V] [current_options] [-o specific_options]
special mount_point
mount -a [-F FSType ] [-V] [current_options] [-o specific_options]
[mount_point ...]
Unable to mount /cdrom/Solaris_*/Tools/Boot/usr
#
What does this mean? Who is trying to mount a CD here? The Netra or the
Blade? Any ideas?
Thanks in advance,
Andreas
Comments
Got something to say?
You must be logged in to post a comment.
