DAT 72 tape drive (hits end of tape)
2007-12-25 5:17:00
Sun StorEdge DAT 72 tape drive. I am using DDS-4 20/40GB tapes.
Here's my dump parameters:
/usr/sbin/ufsdump 0uf /dev/rmt/1hn /dev/dsk/c1t0d0s0
It keeps hitting the end of tape after about 20GB. Prior to
attaching the DAT 72 drive, I was using a Sun DDS-4 drive with
the exact same dump parameters and was dumping over 32GB on
the same tape.
Other than a boot -r, I did not change any dip switches or st.conf
parameters. What could be the problem?
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Carolyn Mayr (IT Specialist/UNIX sysadm) Voice: 410-293-6808 (sec-6800)
Computer Science Department, DivMath&Sci Email: carolyn at cs.usna.edu
572M Holloway Road, Michelson Hall, 9F FAX: 410-293-2686
U.S. Naval Academy WWW: http://www.cs.usna.edu
Annapolis, MD 21402-5002 USNA: 410-293-1000
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Comments
Got something to say?
You must be logged in to post a comment.
