V440 ALOM Console redirect failing
2007-12-25 5:48:00
Quick query; I've got 1 hour left to figure this out or abort :)
We have a V440 which I'm attempting to configure up to use ALOM. I can
connect to the ALOM card no problem, and get to the "sc>" prompt fine.
When I type "console" to get to the console, I just get nothing however;
I can't input anything and nothing is coming back in my direction either.
I thought this would be a console redirect issue, so I've set:
output-device=ttya
input-device=ttya
as per Sun docs, and powered off, then on, but the same thing happens -
I can get to the sc prompt but not into console mode.
Am I missing something obvious here? Here's my showsc output:
sc> showsc -v
Advanced Lights Out Manager v1.5.2
parameter value
--------- -----
if_network true
if_modem false
if_emailalerts false
sys_autorestart xir
sys_bootrestart none
sys_bootfailrecovery none
sys_maxbootfail 3
sys_xirtimeout 900
sys_boottimeout 900
sys_wdttimeout 60
netsc_tpelinktest true
netsc_dhcp false
netsc_ipaddr 0.0.0.0
netsc_ipnetmask 255.255.255.0
netsc_ipgateway 0.0.0.0
mgt_mailhost
mgt_mailalert
sc_customerinfo
sc_escapechars #.
sc_powerondelay false
sc_powerstatememory false
sc_clipasswdecho true
sc_cliprompt sc
sc_clitimeout 0
sc_clieventlevel 2
sc_backupuserdata true
sys_eventlevel 2
ser_baudrate 9600
ser_parity none
ser_stopbits 1
ser_data 8
If I can't get this to work the thing is being ripped out and I'll use
TTYB :) Of course I'll summarize.
cheers
Sam
Comments
Got something to say?
You must be logged in to post a comment.
