Sun Solaris 5.10 with Sun Blade 1000 reports "Fatal Errorreported by : (cpu0)
2007-12-25 6:42:00
-----------
ok> .version
Release 4.5 Version 10 created 2002/02/11 10:38
OBP 4.5.10 2002/02/11 10:38
POST 4.5.9 2002/02/05 21:25
ok> setenv diag-level max
ok> setenv diag-switch? true
ok> reset-all
ok> test-all
No Problems
ok>obdiag
obdiag> setenv diag-level max
obdiag> test-all
No Problems (Testing /pci@# ...... passed)
obdiag>version
Obdiag library 1.6 01/07/30
obdiag menutool 1.3 01/06/01
Power Up Procedure :
--------------------
1. Switch Sun Blade 1000 ON
2. System Fans kick in, followed by Disks spininning
3. Power On Button will illuminated and then not illuminate.
4. System will either sit there do nothing
Any Ideas - System was o.k with Solaris 9, but since placing Solaris 10 on
it - it's been questionable on startup.
Does my OBP needing upgrading to support Solaris 10 ?
Hope this Helps, Look forward to your responses.
Geraint Searle
-----Original Message-----
From: Daniel Vega Villa [mailto:daniel.vega at yucatan.gob.mx]
Sent: 12 December 2006 14:44
To: geraint_searle_sun at yahoo.co.uk
Subject: RE: Sun Solaris 5.10 with Sun Blade 1000 reports "Fatal
Errorreported by : (cpu0)
How's your OBP level?
Have you tryed:
setenv diag-level=max
setenv diag-switch=true
reset-all
to do a extended POST to see if your system board is faulty or memory or any
hardware at all...
ISC. Aarsn Daniel Vega Villa, Sun SSE,
Coordinacisn de Servidores y Servicios de Internet
Oficialma Mayor - Gobierno del Estado de Yucatan
Tels: (999) 920-5494, 920-5495, 926-3195 ext. 42012
Polmtica de calidad: Contribuir al desarrollo ordenado, eficiente y con
calidad de las Dependencias y Entidades de la Administracisn Pzblica, a
travis de instrumentos normativos y administrativos.
-----Mensaje original-----
De: codeprof-bounces at codeprof.com
[mailto:codeprof-bounces at codeprof.com] En nombre de Geraint Searle -
Yahoo (SUN)
Enviado el: Lunes, 11 de Diciembre de 2006 11:52 a.m.
Para: codeprof at codeprof.com
Asunto: Sun Solaris 5.10 with Sun Blade 1000 reports "Fatal Errorreported by
: (cpu0)
Running Solaris 5.10 + all latest patches on a Sun Blade Workstation 1000,
reports "Fatal Error reported by :
(cpu0)" on boot up.
System has all patches applied and have tried replacing cpu to a known good
cpu - still reports problem.
Any Idea's ?
Geraint Searle
Send instant messages to your online friends http://uk.messenger.yahoo.com
_______________________________________________
codeprof mailing list
codeprof at codeprof.com
http://www.codeprof.com/execute/ask/?codeinfoid=42567
___________________________________________________________
All new Yahoo! Mail "The new Interface is stunning in its simplicity and ease of use." - PC Magazine
http://uk.docs.yahoo.com/nowyoucan.html
Comments
Got something to say?
You must be logged in to post a comment.
