Forceload errors
2007-12-25 9:43:00
original question was:
-----------------------------------------------------------------------
> Managers,
> Have any of you ever gotten "Forceload" warnings during a boot
> after installing Veritas or DiskSuite? If so, do you know why these
> occur? The OS is 2.5.1, and I've gotten the warnings on a couple
> of different boxes (Ultra1, U450).
> Thanks for any help/hints/solutions.
>
> Darryl
-----------------------------------------------------------------------
The answer is that the installations of DiskSuite and Veritas cause
forceload
entries to be placed in the /etc/system file. These entries are for the
purpose
of loading modules that will be used by the DiskSuite or Veritas
software.
The modules cover things like hotsparing, mirroring, RAID-5, etc. Any
of
the modules that are not used will cause the output of a warning when
the
system attempts to load them during bootup. If these warnings are
bothersome
to the sys-admin that sees them, they can be stopped by commenting out
the
offending lines in the /etc/system file. The attempt to forceload the
modules,
however, is completely harmless.
I'd like to thank, specifically, the following for there replies:
Terry Mitchell
Tom Vayda
Stephen Harris
Edward Turner Farrar
Larry Pazdernik
Christopher L. Barnard
Matthew Stier
Russ Poffenberger
Jeff Wasilko
Petri Kallberg
Birger Wathne
Peter Bestel
David Harte
K. Ravi
Jim Robertori
Ronald Loftin
Thu Peter Danh
Comments
Got something to say?
You must be logged in to post a comment.
